CNC turning center Alex-Tech VT15L

CNC turning center Alex-Tech VT15L

Предзаказ
Rating:



Main characteristics All specifications
Swing over the bed, mm: 480
Max. turning diameter, mm: 390
Max. turning length, mm: 370
Slideway slant angle °: 30
Through bar capacity mm: 42

Viper VT series

 

  • The rigid monolithic cast-iron (Meehanite cast) bed of the Viper CNC turning center series provides maximum precision and reliability of the machine.
  • Slant bed  30 °design with integrated stiffeners provide Viper exceptional stability under harsh cutting conditions and an optimal chip removal system. The reaction forces to cutting are minimized, which provides a high degree of accuracy.
  • Both X/Z axes on Viper CNC turning centers consist of hardened and ground box-type guides of an inflated size.
  • Fast feeds rates up to 20 m /min for the X/Z axes.
  • The Viper’s VT spindle provide excellent surface finishes and extraordinary metal removal rates.
  • High accuracy P4 grade angular contact thrust spindle bearings ensure precision turning during long-term operations.
  • The drives provide the axle with maximum radial torque thanks to extremely accurate, zero clearances and ball screws with two nuts with a large diameter pre-tensioning.
  • Large, rigid, high-speed (indexed in 0.9 seconds), precision 10-position turret

 

 

Download technical data sheet

 

Characteristics of Lathes
Swing over the bed, mm
480
Max. turning diameter, mm
390
Max. turning length, mm
370
Slideway slant angle °
30
Through bar capacity mm
42
Spindle speed range rpm
6000
Chuck diameter
6
Spindle drive motor(cont)
11
X/Z-axis travel, mm
200+15/440
Rapid Traverse rate X/Z-axis, m/min
20/20
Turret type/Number of tool station
STATIC/12
Tailstock diameter/ travel, mm
60/80
Tailstock travel mm
300
Taper hole of tailstock spindle
МТ4
Machine weight, kg
3700
Floor space mm
2550х2010
  • STANDARD EQUIPMENT
  • Built-in Fanuc 0iTF Control
  • 3 Jaws Hydraulic Chuck
  • Hard Jaw 1 Set
  • Heat Exchanger for Electrical cabinet
  • Transformer
  • Hydraulic Tailstock & quill (hydraulic quill and manual positioning)
  • Auto Lubrication System
  • Chip Conveyor
  • Work Lamp
  • Foot Switch for spindle clamp / unclampHydraulic Adjustment System
  • 12 Stations Turret
  • Block for Base
  • Tool Box with Hand Tool
  • Owner Manual
  • Control System handbook
  • Warranty, 1 year

 

 

  • OPTIONAL EQUIPMENT
  • Collect Chuck (F48)
  • Part Catcher with Conveyor
  • Bar Feeder Interface
  • Air Condition Type Heat Exchanger
  • Manual Tool Presetter (Ranishaw)
  • Automatic Tool Presetter (Ranishaw)
  • High pressure coolant pump 10 bar
  • High pressure coolant through turret
  • Dynamic Turret Type VDI-30/12T
  • Spindle Motor 15 kW Upgrade
  • Spindle C-Axis 

Tags: CNC turning center Alex-Tech VT15L